Find out best stereo tube amplifiers 2020

When you’ve invested a lot of money on a couple of good-quality speakers, you want to make sure you get an audio amplifier that provides outstanding audio quality while meeting your budget. I’ll send you a few tips on audio amplifier technology to help you make the right buying decision.

Best stereo tube amplifiers 2020 come out in various sizes and shapes. They use various technologies, and they have many technological requirements.

And it’s hard to determine which pattern to choose. You just don’t need to be an expert. Only follow some basic guidelines and your amp should be fulfilled.

One major criteria are the amplifier capacity. Models can be purchased which can fill half a bed. Some of the newest models of miniature amplifiers, by comparison, are no larger than a card deck.

Most devices would be the size of a regular audio rack and you can stack it on top of your audio equipment with ease.

Contrary to more conventional tube amplifiers, the vast majority of today’s budget tube headphone amp are solid state amplifiers. A decade or so earlier tube amplifiers ruled. Tube amplifiers, however, have a relatively high deformity in audio.

Audio distortion refers to the deterioration of the audio signal when going through the amplifier, and is given in percentage. That importance is often added when comparing amplifier audio quality.

Tube amps will have up to 10 per cent audio distortion. Based on the amplifier technology employed, solid state amplifiers may have lower audio distortion.

Nonetheless, most modern digital audio amplifiers use a feedback system and can reduce the distortion of audio to below 0.05%.

While choosing an amplifier, make sure you have adequate output power to drive your speakers. The power needed will be determined by how much power your speakers are able to handle, as well as the size of your room where you can listen.

amplifier audio quality

The capacity to handle speaker power is provided as peak power and average power. The peak power value refers to how much power the speaker can handle for a short time while the average power handling value defines how much power you can continuously push the speaker without injury.

If you have a fairly small listening area, then you may not need to push your speaker to its rated power handling capacity.

Possibly you ‘d be good at having an amplifier that can deliver 20 to 50 Watts even if your speakers can handle 100 Watts of power.

Remember that their sensitivity is different for speakers. Usually it would be easier to push a low impedance speaker to high volume than a high impedance speaker. Make sure your amp can control impedance on your amplifier. The quality impedance range of speakers can be easily found in the user manual of your amplifier.

Contact Us

Project New West
407 Baker Avenue
Dallas, TX 75204

[email protected]


Project New West is an award winning team of producers creating music in a state of the art recording studio located in downtown Dallas.